Product Support

In very cold weather bubble wrap would be of little use for insulating the Aquaroll.

Unfortunately we don’t offer an official insulated Aquaroll cover, however, there are other companies who sell insulated bags suitable for the Aquaroll.

We are looking into producing our own thermal bag and pump protector for the future.

The bottom hole is a result of the blow mould process and use of a blow pin. We advise that this bottom cap is always left close. When you empty your Wastemaster we suggest you loosen the top cap, allowing air entry. Open the middle cap completely to release the waste water, when doing so ensure that the middle cap is inserted into the cavity on the Wastemaster to keep it out of the way.

If you are using your Aquaroll with your Caravan or Motorhome you will need to use it in conjunction with a pump. If camping you will need to use it in conjunction with a stand and tap; you do not require the pump.

If your Aquaroll is properly maintained you should expect at least 10 years usage, but you may need to replace components such as caps / handle etc. Replacement parts can all be purchased via our website or all good caravan and camping stockists.

To fit the pump connector simply stand the Aquaroll upright, remove the cap and screw the pump connector into place.

We would only recommend pulling the Aquaroll.

We would always recommend changing both tyres at the same time to ensure that the barrel remains even. Remove the old tyres and put on the new ones at room temperature as they will be easier to place.

We manufacture Aquarolls in Beige and Silver at present.

We do not currently have anything that will allow you to connect 2 Aquarolls together, but this is something we are looking into.